I just dropped my DSC-V1 while the zoom lense was out. Now the zoom seems to have become fixed and when i switch the power on it makes a clicking noise as it attempts to close the lense. Eventually it gives up and a message on the screen says "turn power off and on again". I guess that some cog or other got damanged when the camera hit the floor. Is there anything that can be done?

After my DSC-W7 exposed to a moisterous case for about an hour. I was able to take a shot. but after a while the camera suddenly powered it off. and I could not power it on. what is the problem? thanks. Yong.

Hello, I have a Sony DSC-W5 camera and the screen is busted. How much would it cost for this part, and how much would it cost to have it fixed? Thank you for your time.

I have a sony dsc-w5 with a cracked lcd screen (from the inside) how much woud it cost me to replace it? thanks

Hi Alex, I have a DSC-S75. When I turn it on the lens motor seems to be stuck. It won't open or close the lens. I can hear it trying to work and thena message on the LCD says to turn the camera off and then back on. Same thing happens. I've tried taking the battery out and waiting 15 seconds and that doesn't work either. I've tried a different battery and I know the batteries are charged. What do I do? Can this be fixed?

Hi, my Cybershot DSC-T1 was dropped and the four screws on the sides popped out. It still worked for about a week but now won't even turn on. Can this be fixed and what kind of cost am I looking at? Thanks.

When I turn on my Sony-Cyber-shot DSC S70 it makes a whirring sound and is out of focus. Sometimes if I turn it off and on several times it come on in focus. I would appriciate it if you can give me a rough estimate of the cost and time it will take to repair. Thanking you in advance, Leo Sacco 508-285-5787

i have a sony mvc-cd200 i get 13:01 error and then i get drive error 32:01 what world it cost to fix?

Does anyone know where I can find a replacement LCD Screen for my DSC-P200 Sony Cybershot Camera?

Hi! Similar Problem: The camera (P200) was dropped approx. 2 weeks ago and showed an error message “E:61”. The zoom was faulty afterwards but the problem resolved after resetting the camera. A few days later, however, the same error code re-occurred and since then the zoom has not been working despite resetting etc. Is this likely to be mechanical or a "common" electr./ circuit problem? How much would it be to repair it? Thanks! PS: I live in the UK.