Model AV-32050 1999 serial 08431724A II have lost most of my channels. 2-13 are fine. everything above that is just a BLUE screen. it must have happenened sometime late on 6-15-09. Can you help? Thanks, Roger

Hi, I have a JVC AV 32 WF 35 TV that will not power up. I get a green power led. and thats it. Any ideas? Thanks

We recently purchased a JVC camcorder, model # GZ-MG330AU. We went to use it today, and all we get is a blank white screen with horizontal lines. Can't get a picture or go to the menu. This camera was purchased just over 2 months ago and they will not take it back. Today is the first time we were trying to use it. Has anyone else had this problem with the screen?

I have a JVC AV-56P575. Recently there were some power outages which fried my FIOS HD set top box. I am now having problems with my TV. None of the component inputs (except for the Coax) work properly. The AV inputs split the screen vertically and displays the same image on both sides (not split evenly, i would say it's split 40% on the left and %60 on the right. The RGB component only plays sound, no video. The HDMI port does nothing. I have tried the jumper fix for the HDMI as indicated on another website (i cannot paste hyperlink, it blocks my post when i do) which did not work. Ironically, ALL ports worked after the outages, and only started to have problems AFTER hooking up the new FIOS HD set top box. I am sure this is just a coincidence. Is there any way to do a factory reset from within the Service Menu, maybe this will help? Thank you for your time.

I have a JVC VCR PLUS LP30350-003 that shows the surtitles (written dialogue) across the screen when playing tapes and it appears the menu feature is non functioning. How can I remove this display on the TV screen? Thank you.

i need a power adapter cord or charger cord for jvc camcorder gr-sxm26ou please help me find one

I have a jvc camcorder Model gr-dvl505, I am constantly getting E04 safeguard mode. How do i get this off? Please any help would be greatly appreciated. Thank You.

I have a Jvc modal av-36d503 chassis a108, manufactured aug. 2002 serial 13731466 m . I can't get the tv to turn on at all, when I plug it in I get a buzzing sound and the timer light on the front will blink. I took it apart and found the source of the buzzing, if you are looking down on the board the part is in the right front corner, it runs main power from the board to the tube. I think this part maybe called main pwb. Is this a part that often goes bad in these modals, If that part at all? can I get just this part or do I have to get a whole new board. And how much would the parts be? Thank You Sincerly, Jon B

My JVC camera model # GR-D750U is stuck in safemode. It does not have a cassette in it. When we try to put a cassette in, it will not retract into the camera. The error message keeps coming up. We have tried removing the battery, we tried charging, we tried removing the battery and running on the power cord. I really need my camera, if you know how to resolve this, please let me know. Thanks :) Lindy

Like some of the other customers, I also have a JVC AV-32D502 32" TV with a timer light problem. When I push the power button, the timer light button flashes but the TV will not come on. I have tried unplugging and re-plugging it several times and sometimes it will come on after about 10-15 attempts. When it does come on, the picture is not stable and will go out in a few minutes. I would like to know if it can be reparied or if it might be a candidate for the landfill. Thanks.