Hello, you just might be my savior!!! I’m having convergence problems on my AV-48WP30. Almost without fail every time that I turn on the TV about one minute later the blue light goes wacky and causes a huge shadowing issue. I’ve attempted to play with the convergence but it won’t allow me to line everything up properly. Every once and a while it will turn back to normal but most of the time I’m having the same issue. Any help that you might be able to give would be much appreciated. Thanks so much for your time!!!!

service centre in mumbai

We have had so many problems with our big screen JVC (HD-52z575PA). Not counting the first recall (ballist),Technicans have replaced 3 lamps, a ballist assembly board, fixed a connector seeded wrong, and now have a Light Engine and Digital board on order and are awaiting parts. This is all less than a years timeframe. Thankfully we purchased the $400 warranty from Sears, (the lamps cost $199 each) and we will be installing our 4th lamp next week when it arrives with the other parts. So $199 times 4 lamps is almost $800; the warranty has already paid itself! If these last attempts in installing new parts fail, we will look into the No-Lemon guarantee offered in our Master Protection Agreement. Over 3 service calls in a month's time of our tv working sporadically and missing work for home service calls had been disappointing and unacceptable. Such a shame for something we paid so much for doesnt work properly. thanks.

i have a jvc digital camcorder. model gr-d244u every time i turn it on i get the error remove and reattach battery unit in safeguard mode 01. can you help?

When I turn my camera on , i get a message saying remove and reattach batery , unit in safeguard mode 01. what do i do? grd244u

When I turn my camera on , i get a message saying remove and reattach batery , unit in safeguard mode 01. what do i do?

i have a jvc tv 37" about 6-8 years old and the picture has a thin line accross the middle of the set and cannot view the picture. can you help me or what should i do?

JVC GR-DV3U. Just bought it used. Tried to take out the existing tape and put a new one in. (Brand new JVC tape). When I pushed down on the lid to close the tape drive (I pushed where it says "PUSH HERE") I had to push it several times before it stayed down; but the tape drive mechanism never finished loading the tape into the camcorder. It\'s now just stuck there and I can\'t get the tape out (pressing on the "PUSH HERE" does nothing)and the camcorder won\'t load it. When I \'close\' the over and re-open it (keep in mind it doesn\'t close all the way as the tape loading mechanism still has the tape half-way out of the drive)- I get the infamous Safe Mode E01 message. Obviously, resetting the battery does nothing... any advice? Thanks in advance. Ben

Hello, I have a JVC 21' TV. When switched on, the power LED comes on, no picture is displayed and when i press the channel Up or DOWN, it like tries to switch on, the n the Timer LED starts blinking. No picture is displayed. Regards

there are a couple things im confuesed about.. when i put it in video mode instead of memory mode, it says its in safe guard mode and to remove the battery. also i cant seem to get the tape in.. please help