I have a JVC model # GR-D295U it is stck in safe mode.Can you give me information on how to correct this? Thanks Chris Harper

JVC AV-32980 won't turn on. Appears a known problem as I haev seen several folks discuss this exact same probl;em with series 980 TVs. Stacy, please advise on recommended next steps

I have had my JVC camcorder for about 9 months now. All of a sudden it started showing this E01 unit in safeguard mode attach and rattach battery. Product # is GR-AXM17u. Please help Marva Otis

I have had my JVC camcorder for about 9 months now. All of a sudden it started showing this E01 unit in safeguard mode attach and reattach battery. Please Help Marva Otis

We have both a TV and a VHS player and are very pleased with both but we do not have the instruction sheet to operate the remote. If possible please send me one at 1007 Ottawa Street, Leavenworth, KS. 66048=l830. If theres a small charge I will send a check by return mail. In the meantime if you could guide me by return E=Mail how to solve the following problems I would very much appreciate it. We have one station we have a picture but no voice. we have another station that the voice is coming through in Spanish. On the setup modethe TV is English,but why is the language Spanish just on this one station. Please tell me how to change the language and un-mute thje other station. Thank you very much for your instructions.

Hi there - I have a JVC TV model no. AV28T25EIS. I'm in Dublin, Ireland. The TV is three years old, and as of yesterday it has a sound fault. The sound comes on full blast and does not respond to the volume control. The volume infobar appears on the screen and can be adjusted up and down with the remote, but it does not affect the speakers which keep blasting away. Also, the infobar has a little speaker icon on it which is normally lit up in a yellow colour, but is not now. the mute button also doesn't work; it calls up the little mute icon to the screen bit does not affect the sound. Its as if the TV volume control has been turned off by software, but I can't find anything in any of the menus to restore it. Any ideas? Conor

My JVC tv model #AV-20f703 only shows the basic channels 2,3,4,5, and 6. The remaining cable stations come in black & white with no sound. I checked all the connections. Connected the 17" LCD tv to the same cable and it works fine. So we can illiminate the cable connection/service as the problem. tried changing the batteries in the remote control also.

I have a JVC gr-dx77u and it has a problem that many others like it seem to have. The zoom is stuck all of the way in. I can manually back it up, but as soon as I let it go it zooms in again. What can be done? This should have been a recall it seems to me.

I have a JVC AV-27920 and it turns on for 5 seconds then turns off, then the on timer light blinks. Do you know what could cause this and if its worth it to fix it? Thanks

I have a MiniDV JVC GR-D73U camcoder, my problem is i dont know how to transfer the still videos from tape to pc and burn it into VCD or DVD. I already install the Image mixer 1.7 but camcorder cannot detect, but if i switch video to memory, it detect easily and transfer the still images using Adobe photo. Why is that wen i switch it back to video and try to transfer the captured videos from tape, the camcorder cannot be detected by the image mixer. wat will i do?