Hi Stacy, was there any solution to this problem , post copied below. Re: JVC service or questions Stephens - 20th May 2005 3:45 I have a JVC television, model AV-27S33. It is hooked directly to cable, no cable box. Suddenly, I am unable to tune ANY channel below 48, but any 48 or above come in crystal clear. There is no hint of a picture on the lower channels, even if I turn off the blanking. My VCR still receives all channels perfectly normally. This is not a matter of not having the channels programmed into memory, I've gone through the channel setup numerous times, it just won't pick up the lower stations. Any help would be greatly appreciated! Reply Re[2]: JVC service or questions Brandon - 25th Sep 2005 8:24 I am having the exact same problem. Earlier today I was watching channel 25 and it was getting snowier and snowier. Finally the signal gave out. I started flipping channels and I could not get anything under channel 48. Also, I intermittently could not get channel 98 & 99. I tried do a channel scan over and over again. I switch to air, I switched to cable. I unplug the TV for a couple hours. I changed the cables. No change. But my other 2 tvs and my VCR on this tv all receive all channels. I can't even watch my vcr on channel 3 of the TV (although I can watch it through the A/V connection). Re[3]: JVC service or questions Fred Tobinski - 8th Sep 2006 5:48 I to am having this problem with the channels. Is there any solution??? please help.

I Need A Remote for Model # CA-NXPS1, Where can i Get One.

I keep getting an error message on my JVC Mini DVD Model #GR-D30U "Please Wait, Condentation, Operation Paused. Is there any way to reset the camera or work around this problem. As it stands not the camera is inoperatable.

My GR-D30U makes a crackle noise when in the play mode and show a blue screen with flashing dashes and what looks like (tc) at the bottom left of the screen. It won't play. I tried using a head cleaner and no luck. Do you have any ideas?

Hi, I own a JVC GR - DX77U model. Recently my "REc" button is not working. When i press the same its not responding. I am able to use remote and recording works. What might be the problem? Is there a lock which i might have set unknowningly? thanks

I got a message to clean the heads. I tried to no aveil. when in play mode the camera does nothing. I don't know where to start

i have a jvc av-27bm4 and it has the closed captions on it. but i would like to take them off but i can't figure out a way to get them off. if you would reply back to me and tell me how to do this i would appreciate it, thanks

Dear sir: I have JVC Vedio Camera model GZ-MG130AS, while switch-on flash camera mode and Vedio camera mode on together, and nothing showing on screen then when try to off that also not working. the swith not functioning properly, aleady removed battery pack to re-set but still same. thanks,

I have a JVC MX-C55 and after I've hooked up everything and turn the power on the system reads "@@@@@" and wont play any cd's or anything. Its a fairly new system and the person who had it before me said that her grand children were playing around it and pressing all the buttons and stuff then it just stop working. Help me please!

i have a jvc dvd home theater system model # thm505 with the subwoofer model # sp-pwm505, the problem i am having is when i turn the system above 50 and bass hits the sub turns off. All of my speakers run out of the amp in the sub, so all sound is lost. i can turn the system off and right back on and it works just fine till another bass note hits. Also the fan on the back of the sub does not come on at all. Any help would be appreciated. I am replying to PECHORINS. Thank You.