My job is electronic technician. Since, in my thought this is something like sofware problem -I've tried to push the Reset button near the Smart Zoom Button, but it only goes back to original default setting. I do not want to open the Camera for inspection since it might introduce another problem as the screw and components are to small to handle, so ive tried to search the internet for possible best solution and found this site. The solution was very funny, but it works after following it. I think this is something like a servo motor problem, if the lens shutter is sticky due to dirt in the opening of the lens and abnormal torque of the shutter cause an error current that trigger this error. So, after dragging the Camera the shutter mechanism loosed and goes back to normal movement. Thank you so much for posting this solution.

Reply