Hi there I have recently bought a jvc 32S60 LCD screen. When I tried connecting my upscaling dvd player via an HDMI cable all I got was a green screen. Could you please tell me how to fix this? Or if not, could you please tell me how to enter the service mode on this screen. Thanks.

Problem with power on JVC GZ-MG30U HDD camera While using camera stopped operation, shut off with top switch & closed lcd screen.When tryed to re-start get no response. Battery is charged & tried ac power. Used reset button & still nothing. Have had some troubleshooting done & it appears there is no power going from AC adapter (putting out just over 11 volts) to battery contacts.Have about 6 hours of recording currently on hd & at all cost want to save this. Anything else that can be tried before taking in for service ? While on vacation in Hawaii went to camera shop & they checked that battery was good & ac charger was working. If nothing else is it possible to have harddrive removed for recovery before sending off for service & probable reformatting ? If you could reply directly to email that would be great - dawrights@adelphia.net

I have a jvc compact vhs camcorder model gr-axm225u and it is in safe mode and says remove battery. I have done this and it doesn't reset. HELP

Some how while I was watching tv a service menu came up and of course I played around with it and now the picture is slightly misaligned. How do I get back to that service menu. The tv is a JVC AV-27F703. Thank you!

Hi, I am getting error message 'E04- UNIT IN SAFEGUARD MODE' both in Play and Record modes. It also says 'REMOVE AND REATTACH BATTERY'...i have tried several times doing the same but still error keeps on coming..any help will be appreciated. Thanks, Narayana

i have a JVC 30inch widescreen I-Art, model # AV30W475,had a lighning storm and every since the timer light is on i can shut it of with the tv or the remote. but the tv is dead. Can you help me find out what's wrong with it. Thanks.

I bought a JVC 700X digital zoom camcorder less than 2 years ago. Everything was fine, then one day I got the error code E-03. I bought a new battery, thinking that was the problem. WRONG!!!! It still gives me the same error code. What does it mean, and how can I fix it. Please don't tell me to take it to a dealer!!!!!! Too Expensive for repairs. Thanks

Stacey, I have a JVC GN-f2U that i've only used a couple of times in the last 2 years and now when I power on the unit I get a message to remove the lens cap. The LCD and the eye peice are both black. I can see the date and time and a blue hand flashing. I also see a left and right arrow at the bottum with a portrat and a mountain on each side. After playing with it, it will work, but let it sit for a few days and Im back to square one. Any help would really be helpful. Thanks Shawn

i have a AV-27730 work for awile, then goes black with a bright horizontal line accross screen, for a few minutes, then goes completly black, there is sound. Do you know what could be the cause? TV is 9 years old, is this worth fixing, approx. how much?? could i repair myself??? thanks.

My JVC D30U Lens Cap error When I turn on my camcorder I get a Lens Cap error even if the lens cap is not on. I have clenaed the lens and it still shows blank. Does anyone know what I need to do to get this error to go away. My camera is useless if you cannot record. Thanks is advance.