I have a good working condition JVC vcr for which I have lost the owners manual. When it is initially turned on or after a power interuption a code is selected via the Remote, are you able to help me find that, your help in any way will be appreciated. Regards Jack

Dear Stacy. I read your comment in PECHORIN'S web site regarding the error codes in the plasma sony PFM-500A2WU, I have this model and the display show a codes error 22 and 12, in adition the power boton is lighting and the equipment turn off and turn on several times until you disconect the plasma screen. Can you help me with this.? Thanks in advance for your coperation. Alberto Lopez alberto.lopez@bbva.bancomer.com geles77@hotmail.com

I am receiving a c:13:02 disc error with one particular disk using my sony mini dvd player. Can I fix?

I have DCR-DVD92 sony camcorder, it was working fine for over a year. Recently it started giving error code C:13:02(Disc error). I am using only sony DVDs. I tried with many new sony DVDs, same error code displayed. Please advise if you have any other idea to fix this error . Thank you... John

E6 5C040301 i got this error trying to reord on a emerson dvd recoder wasted a whole pack of disks which i have been able to use the same disks for the same shows before without any problems also it wont let me leave a disk in the compartment i have to record the whole 6 hours without turning the system off orr it wont let me finalize the disk

hello, one of my dsr 1500ap, is giving me this error 91-215 at start-up. the result is that the front panel is disabled. i replaced the system board and the error is gone... i need to translate this error because i've got one machine down

Have the H07 error code. Can you help. No good doing resets via manual TIA and God Bless, Jim Walstrom Grants Pass, OR 97526 gpbulletin@charterinternet.com

hello i have a jvc gr-ax35 and when i try to rewind or record it comes up with e 03 and when i open up the tape holder its chewed up. i would really really apreciate it if you could help me tank you henry

I just purchased a Panasonic portable dvd player Model Number DVD-LS90 less than three weeks ago. It now has an Error code in the upper corner of the screen that reads H03. It will not do anything. Is this a major problem or an easy fix. Thanks for your time.

In response to your message, I am getting an error code and it will not read disks. It is a 2005 Pontiac Grand Am and the only issue is that the battery went dead and I needed a boost, after that no CD player. It make a noise every 15 seconds as well. Before that, no problems, any suggestions?