PECHORIN'S home account archive eshop globalmediapro |
|
Home | Previous messageJVC CCD lens Cap error JFisher - 24th Jan 2007 14:51 Fixed After discovering my cam was not elligible for the free repair offered by JVC, I decided to have a go at repairing it myself. Carefuly took it apart, documenting and labeling the hundreds of screws. Once inside pulled and reconnected each circuit ribbon. Re-assembled...presto, works like new again. By the way, screw you JVC
1 comment
Yes! but it should be pointed out to anyone reading of your experience that the ribbon cable problem only applies to a small number of models of the DV range, as in all other cases its because a massive batch of later to be discovered, faulty CCD image sensors that were supplied by Sony to JVC that are responsible for 99.9% of these failures. All models in the GR-D / DX / AX / FX / SX / ranges as well as a few odd models are susceptible to developing this fault. I only mention this just in case someone starts to dismantle their camcorder and end up with a disaster that would negate the free repair offer. |
|