Yo dudes, Listen up, the diplay colour of the XR-C350 cannot be changed. Thats the bad news but if you advertise on something like ebay you might be able to swap flip fronts with someone who is looking for the one with amber illumination. Now the pin outs. Under no circumstanses must you try to connect the unit without obtaining the correct plugs. If you have any trouble finding these I can supply the correct items for £9.99 sterling + p&p. They are v.small and light so the p&p will not be very costly. Choose to ignore this advise at your own peril!!! Pinouts Bottom conector Black 12v -ive Orange/Yellow Constant 12v +ive (ie direct supply from the battery) Red 12v +ive (from ignition aux supply) Blue External amp control supply (you don't need this unless you run an external power amp in which case it is connected to the blue control cable, if not it must be INSULATED and taped out of the way) The top connector is to the speakers and is split into pairs verticaly. Each pair to one speaker. As far as I can remember the left two pairs feed the left front and back speakers and the right two pairs to the right front and rear speakers. As long as you remember to observe the speaker polarity all will be well. Good Luck.

Reply