Re: Re: JVC error codes assistance

Hi
I have a very nice DVL310 that doesn't power on.
Can you please tell me what can be wrong???
belobrk_zemun@hotmail.com

Reply

• JVC error codes assistance anonymous - 26th Jan 2004 16:30
  You could possibly have a blown fuse on the board inside the unit. That would be the first thing we would check. IF that is not the case, we would have to dig deeper into the unit to pin point the power problem.
  Have you tried power with the DC cord too or just the battery?
  
  
  • Re: JVC error codes assistance
    Brandon
    - 5th May 2004 12:07
    I have a KD-GT7 head unit. This unit has been installed and is powered up displaying error code 12. Can anyone tell me what this code stands for?
    
    
  • Re: JVC error codes assistance John Maloney - 4th Feb 2005 2:27
    Good evening, I saw your response to the fella with a JVC camcorder which woundn't start up. I have a similar problem with a GR-DVL805 from when I purchased it new, unfortunately JVC never responded back Both the battery and ac adapter will not get it started though if I lick/moisten the battery terminals the camera will start if it's in the run or record mode. A JVC repair shop said it is the board and for $500.00 Canadian it can be fixed, I stayed with licking the terminals. Any suggestions? Thamk you.
    
    
    • Re[2]: JVC error codes assistan my camcoder show this error 3
      MOHAMMAD AFZAL MUGHAL
      - 17th Dec 2006 21:58
      I HAVE JVC VICTOR MINIDV NTSC GRDVL 40 MY CAMCODER SHOW THIS ERROR E03 , ITS CAN'T RECORD THE MOVIES AND CAN'T PALY RECORDED MOVIES . -WHICH ACCEREIES REQUIRD FOR TRANSFER DV TO PC . -MY CAMCODER JAPANIES LANGUGE SO WANT MUNUAL BOOK REQUERD. -I DON'T HAVE ITS REMORT CONTORL. THANKS A LOTS
      
      
  • Re: JVC error codes assistance Toar - 20th Dec 2006 5:24
    I have a model GR-DVP3EA, the tape cannot reject, I have try nearly all possible solution, like tapping on it, take the battery out, using the DC cable, the only one I have not try is tapping with a slagged hammer maybe that will work, any more ideas?.
    
    
    • Re[2]: JVC error codes assistance Pat Manley - 20th Mar 2008 18:27
      I fixed my JVC camcorder by moving the piece of white plastic in the back. Open the tape loader and look to the back of the unit. The tip of the piece of white plastic should be up. I used a needle nose plier to lift it up. If it would help you I can take a picture of it for you. Regards Pat
      
      
• Re[3]: JVC error codes assistance prakash - 17th Sep 2007 13:47
  error E 03