HOW DO YOU FORMAT A FLOPPY ON YOUR COMPUTER?

Hi, thanks for the good advise. I took a small screw driver and move the two tabs that are on each side of the camera's drive. Moved them in just slightly, which corrected my disk error problem. Thanks all, Brad

720 Diskettes have the problem only use diskettes formatted 1.44 No = DSDD Yes = DSHD

I had the same Mavica 1301 disk error. Did everything suggested above. No luck. Took the camera apart - still no luck. Finally, I took a little screwdriver and stuck it inside the diskette opening and ROTATED THE LITTLE ARM THAT SPINS THE DISKETTE. That did it! You can see the plate rotate as you move the arm ... just make sure you move it around. I don't know if the rotating plate was stuck or what, but the camera worked fine after that. Good luck!

I have a fd 85 with this error have tried everything where do we send to get repaired? thanks

I have a Mavica CD-200 that pops up with the C:13:01 error i have cleaned the lens but no luck it still wont recognize any type of cd i put in.

Chelito If you still have the fd100 for sale - let me know. Thanks

Hola, I got the new 32mb memory stick last week and put it into camera. It shows C:13:01 (flashing) What do I do? Return it to the store? I tried to format it but not working. Let me know what should I do? Thanks

Anyone figure this out. My error is my own fault. My battery died as I was finalizing a CD and now I get this error. Can someone provide some advice on recovering the info off the CD? Greg

i have a mvc-fd73.my work bought a new one because of this error code, so i took it home thinking i could fix it, but no luck,,Ive tried everyones ideas and still no luck. So if anyone thinks they know the answer or would be willing to fix it, please let me know,, thanks splash