PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home | Previous message

Re: i need to set the clock on a jvc kd-g200 cd player

Hal Posted Feb 02, 2007, in response to:jason

Try this: Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,” or “AMP GAIN” appears on the display. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour. 1 2 3 Set the minute. 1 Select “CLOCK M” (minute). 2 Adjust the minute. 1 2 4 Finish the setting. To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, the display changes as follows: • During tuner operation: • During CD operation: • During power off: The power turns on and the clock time is shown for 5 seconds, then the power turns off.

Reply

Share |
0 comments



  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed