It may just work. The possible solution to the famous Condensation Error on JVC camcorders.

What you have to do: 1. Take off the battery and take all of the screws out of the exterior and also behind the LCD. I recommend drawing a sketch of each view of the cam on a pice of paper(top,side,bottom,back) and place every screw it its rightful place, cause they're different sizes and you're shure to mix them up if you're not careful 2. Carefuly pull the two sections of the camera apart (left and right). You will notice a connector linking the two parts (mine is a thin and wide white "cable" -or whatever it's called) 3. Disconnect the connector from one side. I think you can disconect it only from one side, you have to pull up on a strapping mechanism. Careful not to force it. Figure it out patiently. Wait about 5-6 minutes (thats how long i've waited) and re-connect it. This kinda resets the whole camera. 4. Put it back together. ~~~~~~~~~~~~~~~~~~~~~~~~ It worked for me, at least till now (i've finnished a couple of hours ago). If anybody tries it, please post and leave your feedback ps: i have the JVC GR-D40 model. I've gotten this trick from another person who has GRD-90U. So it should work on any jvc...

Reply