| PECHORIN'S home account archive eshop globalmediapro |
|
|
|
|
|
|
Home | First message in thread | Previous messageHi, I also have the same problem as all you guys. I have a 508 sub, it has 8pin din. I really want to get it working, I have pulled the main unit out, hoping (like you guys to work out the pins) My way of thinking is that the 8 pins, 3 at the top 3 middle and 2 at bottom, the 2 botton ones would be for the power switch. I was going to try and connect a 3.3v, 5v, 9v, or 12v dc power to the 2 bottom pins and hope that the unit will switch on. My other idea was, that when the main unit is switched on, it compleats a circuit, and then switches on the sub. Any suggestions would be great. thanks Deane. New Zealand.
1 comment
Deane, Been away from the computer for awhile and just noticed your input on this subject. I just bought a TH-M505 centre unit. Still no cable though. I did try a 8 pin to 8 pin cable I had from a Mac computer. But it didn't work either but i think that it is a serial cable and would have some wires crossed for communication to a modem. I did check with JVC here in Canada and found out that the cable would cost $45 cdn to replace. Too rich for my blood. Might try cutting the cable that I have and reversing some of the wires. If the set of 2 pins is for the relay we might be in luck. Will let you know further. PanamaRed |
|
|
