A little update, The problem is still there though. and I don't know if it helps someone but hey.. Even with the error on screen I can put it on the dockingstation and get the photographs onto my computer. After I turned off the camera again, I took the battery out for a few hours. Then I put it back in and switched the camera on again. It started like fresh, asking to set date and time. So I set the date and time and pressed ok, it took 2 seconds before the error re-occured. I repeated above step, but after setting time and date and pressing ok I directly pressed the zoom-in/zoom-out button, the small part of the lens turned clockwise and counterclockwise and moved back and forth, the bigger lensring (don't know how to call it) only turned counter-/clockwise but did not move outward or inward.. I however was then able to turn on the previewdisplay and was able to take exactly one photo and then the error immediately returned, when it tried to automatically show me the review of it. This photo I was able to put on my computer and it looked like a normal photo (note: Taking the battery out and putting it back in after about 5 minutes, sometimes seems to work as well, but not all the time.) I repeated above step without taking a picture, I played with zooming for about 10 minutes (frustated I might add) and twisted the bigger lensring manually, then it also moved inward, very smoothly. no strange noises or other signs that indicated a broken lens. This unfortunately did not solve the problem, it seems I can 'force' the lens inward manually, however when I use the zooming it gets stuck on the same place as before Repeated steps: Once I got the previewscreen again, I pressed the OK-button to enter the menu. No error occured. I was able to go through all the options in the entire menu without an error (did not change settings though). (and I now know I have Firmware version 1.0000, not that that helps much, because there is no way I can update that as far as I know, nor is there an updated firmware to be found) I formatted the internal memory and could enter and exit the menu after that without problems, I in fact could press all the buttons (even review) as far as I remember now. Also I could turn the camera on and off without error. Lens still not moving like it should. I took a picture and I was errorized again. I'm going to continue my buttonpressing trial and error and let you know if I find out more (oh and because I have no warranty anymore, I'm going to see if I can find a tiny screwdriver to check out the camera's inside (mainly the lens) maybe I find something there....) (on a side note: I read somewhere that kodak discontued production of the DX4530, because of technical issues. Does anyone know if that's true and if so, what the issues were (besides the horrible E41-error?) Regards, Reijnaart

Reply