PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home

JVC KY-1900 CAMCORDER INFO

luis Posted Oct 13, 2005

NEED A SERVICE MANUAL FOR JVC KY-1900 OR PINOUT INFO FOR ITS 14 PIN CONNECTOR WHICH HAS 'SRCB2A16-14P' EMBOSSED ON IT

NEED A SERVICE MANUAL FOR JVC KY-1900 OR PINOUT INFO FOR ITS 14 PIN CONNECTOR WHICH HAS 'SRCB2A16-14P' EMBOSSED ON IT . WANT TO GET AN RGB SIGNAL FROM IT. CAN ANYBODY HELP THANKS

Reply

Share |
3 comments

    I´m also looking for info on this camera. Especially what are the VTR selector swith positions (I'm planning to connect it to Sony VO-4800 recorder).

    Reply

    Hi, I am also interested in a manual if possible for this camera. The lense is able to be remotely controlled, and it might be that pin 3 of the RS-1900 plug is some form of serial data connection for sending remote control commands. Info on pin 3 (and data signals & command set) , the remote control socket on the lense, and the pin-outs for the intercom socket would be really handy. Has anybody run the camera directly from a car or motorcycle battery? Thanks Ezekeil

    Reply

    Re: JVC KY-1900 CAMCORDER INFO

     Dirk Posted Nov 10, 2005

    Hi Luis, Here i found a pinout of the JVC KY-1900: Pin 1 : Ground Pin 2 : DC Power Pin 3 : don'nt know, depends on modeswitch at the Back of the camera Pin 4 : Intercom Pin 5 : Intercom / Mic / Tally * Pin 6 : Video Out Pin 7 : Video Out Ground Pin 8 : Aux in Ground Pin 9 : Aux in (Video) Pin 10 : R Out / Batt Alarm * Pin 11 : Gen Lock Input Pin 12 : Rec Alarm / Iris Control * Pin 13 : G Out / Trig Out * Pin 14 : B Out / PB Audio in * * depends on modeswitch at the Back of the camera But remember the VTR/RS1900 switch at the Back of the Camera. for RGB Out you have to choose the Position RS 1900. Hope you succeed Regards Dirk

    Reply




  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed