PECHORIN'S home account archive eshop globalmediapro |
|
HomeMy 1 year old Sony DCR TRV-19 camcorder shows no image in the LCD or viewfinder when I go to record It will play back images on the tape but nothing new will record. Sound will record just fine.
6 comments
Important Notice About Your Sony Product Posted: 10/03/2005 I HAVE THE SAME PROBLEM AND SO DOES MANY OTHERS. SEE BELOW. Thank you for your support and patronage of Sony products. It has recently come to our attention that a limited number of products, manufactured prior to March 2004, that incorporate a certain type of image sensor device (CCD) may exhibit the following: When the product is used in camera mode, the LCD panel and/or electronic viewfinder exhibits either a distorted image or no image at all. We have determined that this only occurs in a limited number of devices, but may be accelerated if they are exposed to hot and humid environments. From October 3, 2005 through October 2, 2007, Sony will repair, free of charge, affected products exhibiting the above-mentioned problem where it is caused by the image sensor device. Sony will also cover the cost of shipping and handling to service to correct this issue. Please contact the Sony Customer Information Services Center for further assistance at 1-866-703-7669. I am having the same problem with my TRV33, but the iris is completely open, even with a bright flash light. There is still no image, but there is sound like Staci said. With the iris open and still no image, is there a problem with the CCD sensor? How could I narrow it down to the sensor and not the board? Anyone have any idea on cost for repair parts? If you want i could repair your camcorder. I am a professionally technician. Please contact me by email. Regards, Niko. Sony CCD blocks are in stock with us. email us further. Hello, you must replace CCD block assy + rubber. Regards, Niko. Take your DCR TRV-19 into a fairly dark room and look into the front of the lens assembly. You should see an iris similiar to that in the human eye, and it should be open. The iris will appear like two triangular devices that interlock. Now shine a flashlight into the lens and the iris should close. If such is the case you have a problem with the CCD or related circuitry. If the iris is not open when you place the camcorder in a dark room there is more than likely a problem with the iris motor or associated circuitry. Eric |
|