i need a schemetic for a nutone solid state rado intercom system master model ima-406 can any one help me.

We have a US home Vitoria 2 with the, NuTone Radio Intercom System Model IM-3003-Series. The Radio is boosing and the door bell is not woking ad all. We woul like to have it repared ore buy a new Master Station. I live in Port Richey,Pasco County Fl. 34668

Hi Chris: I have just moved into a new home and it has an IM3303 intercom system in it. Everything works but the three outside speakers. There is a outdoor control station with 4 screws holding a three button and volume knob cover in it. The board inside has two wires coming off of it that were spliced into the outdoor speakers. The board says ISA Series 30 on it and also has the part # 36744-1a on it. I need to get a replacement for this outdoor control so I can get my speakers working. Can you tell me the part number or a suitable 3 wire replacement with the speaker wires on it?? Thank You Don

hello i have a nutone/broan intercom K1350 its very much like the M+S mc350 it has a loud buzz going through the system when i play the radio even after i removed all the room station wires at the master can you guys repair this master?

I have an old NuTone Wall music AM/FM box IR-10 with intercome IMA 303. It is a 3 wire sys, and it does not work. Do you have a new or used replacement for the music box? I'm in San Antonio,TX.

I would like a manual for this unit, also an outdoor speaker (don't need the face plate). Can I also get 2 speakers for the indoor units? I have all face plates.

We just bought this house that has a nutone speaker system throughout. I am looking to replace my Nutone 3003 Master unit in biscut to a white one. The speakers are waffled but the radio works great.... so maybe it's just us trying to use it? I know it's discountinued, but hoping someone has something in white, appartently my only other option is to get the nm100 but then I'll have to replace all the speakers throughout the house, and I'm not wanting to spend a lot of money on a cosemtic issue. any help would be great. Jennifer

I Have an eight year old Nutone System with two outside stations. The speakers in both stations have gone bad from the weather. The part number is HX0113. Can I buy replacement speakers from you and is there any way to improve the stations for better weatherproofing? Thank You, Gerald Filion

I need a connector for the master station nutone IMA--4406. It is a 9 pin molex connector that plugs into the CN106 port.

Lookiong for a new 3003 main front control panel.