PECHORIN'S home   account   archive   eshop   globalmediapro
.
.


Post new message


Home | First message in thread | Previous message

Re: Re: Professional Video Equipment for Sale

M Kornfeld Posted Mar 12, 2003, in response to:john

Here is the specifications GENERAL Power Source: 120V AC +10%, 50/60 Hz Power Consumption: 48 W Operating Temperature: + 41 F to + 104 F (+ 5 C to + 40 C) Operating Humidity: 35%-80% Weight: Approx. 24.3 lbs. (11 kg) Dimensions (W x H x D): 16 11/16" x 5 3/16" x 16 11/16" (424 x 131.5 x 424 mm) SYSTEM Television Format: EIA Standard, NTSC Color Signal; 525 lines, 60 fields Video Recording System: Two rotary heads, helical scanning Modulation System: Luminance: FM azimuth recording Color signal: Converted subcarrier phase shift recording Audio Track: 2 tracks (Hi-Fi Audio) 2 tracks (Normal) TAPE TRANSPORT Tape Format: S-VHS/VHS tape Tape Speed: SP: 1 5/16 ips (33.35 mm/s) SLP (Playback only): 7/16" ips (11.12 mm/s) Recording Time: 120 min. (2 hrs.) with NV-T120 FF/REW Time: Approx. 3 min with NV-T120 VIDEO Input Level: S-Video In (4P): Y: 1.0 Vp-p, 75 ohms unbalanced C: 0.286 V-p, 75 ohms, unbalanced (Burst) Line In (BNC); 1.0 Vp-p, 75 ohms, unbalanced Ext. Sync In (BNC): 4.0 Vp-p, negative pulse, 75 ohm, unbalanced Output Level: S-Video Out (4P): Y: 1.0 Vp-p, 75 ohms unbalanced C: 0.286 V-p, 75 ohms, unbalanced (Burst) Line Out (BNC x 2): 1.0 Vp-p, 75 ohms unbalanced Horizontal Resolution: S-VHS; More than 400 lines (monochrome/color) VHS; 300 lines (monochrome), 240 lines (color) Signal-to-Noise Ratio (VHS): 46 dB (color) AUDIO Audio Frequency Response: 20 Hz --- 20 kHz (Hi-Fi Audio); 50 Hz --- 12 kHz (Normal) Signal-to-Noise Ratio: 48 dB (Dolby NR On; Normal) Dynamic Range: 90 dB (Hi-Fi Audio) Input Level: Line In/Hi-Fi (Phono x 2); --8 dBv, 47 kohms, unbalanced Line In/Normal (Phono x 2): --8 dBv, 47 kohms, unbalanced Mic: --60 dBv, 4.7 kohms, unbalanced Output Level: Line Out/Hi-Fi (Phono x 2): --8dBv, 600 ohms, unbalanced Audio Monitor (Phono): 0 dBv, 600 ohms, unbalanced Headphone Jack: --60dBV -- --20dBv, 8 ohms, unbalanced TIME CODE Time Code Input (Phono): 1.0 Vp-p, 10 kohms, unbalanced Time Code Output (Phono): 2.4 Vp-p, low impedance unbalanced.

Reply

Share |
0 comments



  


© 2001-2012 - Pechorin's - Contact Us - Report a bug

Pechorin's does not take responsibility for the content of the messages published in the Forum.

RSS feed